info@harlequinpaints.com
High Build Coating
HARLEPOXY ZNPH / ZNCR 40 M
Description It is a two pack primer based on Epoxy resin and Zinc Phosphate / Zinc Chrome Pigment. It gives a good protection in chemical and corrosive atmosphere.
Volume Solids 40% ± 2
DFT 30-40 microns
Mixing Ratio BASE HARD. 3 : 1
Pot Life 6-7 hrs. at 30OC and 65% relative humidity
Spreading Rate 10 - 13 sq.m./ltr
Surface Dry 2 - 3 hrs. at 30OC and 65% relative humidity
Hard Dry 8 hrs at 30OC and 65% relative humidity
Subsequent Coat As per substrate condition recommended coating system
RECOATING TIME - MIN 8 hrs at 30OC and 65% relative humidity
RECOATING TIME - MAX 4 months
Fully Cured 7 Days
Shelf Life Base: 12 months Hardner: 6 months
Surface Preparation "Recommended surface should be free from oil, grease, salt and any other foreign matter Blast clean to Sa2½ minimum with Surface profile not more than 75 Microns. "
Applicable Industry Maintanance / OEM
Application Method Conventional Air Spray/ Brush/ Airless Spray
Recommended Thinner Harlepoxy Thinner
Sugested Use It is used for all steel surfaces as an efficient anticorrosive primer.
“Delivering Quality Coatings, Building Powerful Bonds”
Harlequin Paints Pvt. Ltd. Products catalogue