info@harlequinpaints.com
Packaging
Harlepoxy Clear Primer
Grade Industrial Grade 1
Drying System Air Drying Under Coat
Description It is a two pack clear primer based on Epoxy resin and polyamide curing agent. It gives a good protection in chemical and corrosive atmosphere.
Volume Solids 38 /-2 %
DFT 25-30 µm per coat
Mixing Ratio BASE : HARDNER 2:1 OR 3:1
Pot Life 5 Hrs Minimum
Spreading Rate 12-15 m²/L
Surface Dry 0.5-1 hr. @ 30°C and 65% relative humidity
Hard Dry 12-14 hrs @ 30°C and 65% relative humidity
Tack Free Overnight
Subsequent Coat As per substrate condition recommended coating system
Recoating Time - MIN 10 Hrs
Recoating Time - MAX 7 Days
Finish Smooth Uniform Glossy
Shelf Life Base: 12 months Hardner: 12 months
Surface Preparation New Steel: Recommended for abrasive blasting to Sa2½. If steel is coated by shop primer, clean all damages to shop primer and also clean the surface free from oil grease and any other foreign particles. Maintenance: Remove oil, grease etc with a detergent wash. Remove salt and other contaminants by high pressure fresh water hosing. Remove all rust and loose materials by abrasive blasting or mechanical cleaning. Dust off residues. For best results remove all loose rust by wire brushing and chipping.
Applicable Industry Packaging/construction industry/ General Maintainance/Electronic and Electrical
Application Method Conventional Air Spray/ Brushing / Airless Spray
Gel Time 5 Hrs Minimum
Recommended Thinner Harlepoxy Thinner
Suggested Use For good quality concrete primer. It protects concrete from ingress of moisture and fortifies the concrete strength.
“Delivering Quality Coatings, Building Powerful Bonds”
Harlequin Paints Pvt. Ltd. Products catalogue