info@harlequinpaints.com
General Maintenance Coating & High Performance Maintenance Coatings
Harlepoxy Primer Industrial Grade 2
Grade Industrial Grade 2
Drying System Air Drying Under Coat
Volume Solids 42 /-2 %
Description It is a two pack primer based on Epoxy resin and polyamide curing agent. It gives a good protection in chemical and corrosive atmosphere.
DFT 30-35 µm per coat
Mixing Ratio BASE : HARDNER 4:1 OR 3:1
Pot Life 4 Hrs Minimum
Spreading Rate 12-14 m²/L
Surface Dry 0.5-1 hr. @ 30°C and 65% relative humidity
Hard Dry 12-14 hrs @ 30°C and 65% relative humidity
Tack Free Overnight
Subsequent Coat As per substrate condition recommended coating system
Recoating Time - MIN 10 Hrs
Recoating Time - MAX 7 Days
Finish Smooth Uniform matt
Shelf Life Base: 1 year Hardner: 6 months
Surface Preparation New Surface: Surface should be free from oil, grease, salt and any other foreign matter. Clean the surface mechanically or manually. Maintanance: Manual cleaning to remove any loose particle oil, grease and any other foreign matter.
Applicable Industry Packaging/Automobile-OEM Engineering/ General Maintainance/Electronic and Electrical
Application Method Conventional Air Spray/ Brushing / Airless Spray
Gel Time 4 Hrs Minimum
Recommended Thinner Harlepoxy Thinner
Suggested Use For Good quality protective coating , Fabrication Industries, Machine Tool Industry, chemical industry, steel plants and Automobile Industry
“Delivering Quality Coatings, Building Powerful Bonds”
Harlequin Paints Pvt. Ltd. Products catalogue