General Maintenance Coating & High Performance Maintenance Coatings
Harlemel Primer
Grade |
Industrial Grade 1 |
Drying System |
Air Drying Under Coat |
Description |
It is a Synthetic Resin based under coat primer having good finish outdoor durability and hardness. |
Volume Solids |
30-32 % |
DFT |
25-30 µm per coat |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Spreading Rate |
11-13 m²/L depending on Shade |
Surface Dry |
30-60 mints. @ 30°C and 65% relative humidity depending |
Hard Dry |
10-12 hrs @ 30°C and 65% relative humidity depending |
Tack Free |
Overnight |
Subsequent Coat |
As per substrate condition recommended coating system |
Recoating Time - MIN |
4 Hrs |
Recoating Time - MAX |
None |
Finish |
Smooth and Uniform – Matt |
Shelf Life |
6 months |
Surface Preparation |
New Surface: Surface should be free from oil, grease, salt and any other foreign matter. Clean the surface mechanically or manually. Maintanance: Manual cleaning to remove any loose particle oil, grease and any other foreign matter. |
Applicable Industry |
Auto Ancillary/Plastic |
Application Method |
Conventional Air Spray/ Airless Spray/ Dipping |
Gel Time |
N/A |
Recommended Thinner |
Harlemel Thinner |
Suggested Use |
It is general purpose anti-corrosive primer for Industrial use with good durability. |
Harlemel Quick Drying Primer
Grade |
Performance Grade |
Drying System |
Quick Drying Under Coat |
Description |
It is a Synthetic Resin based undercoat primer having quick drying properties with good outdoor durability, good hardness |
Volume Solids |
48-50 % |
DFT |
25-30 µm per coat |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Spreading Rate |
17-20 m²/L depending on Shade |
Surface Dry |
10-12 min. @ 30°C and 65% relative humidity depending |
Hard Dry |
6-8 hrs @ 30°C and 65% relative humidity depending |
Tack Free |
Overnight |
Subsequent Coat |
As per substrate condition recommended coating system |
Recoating Time - MIN |
6 hrs |
Recoating Time - MAX |
None |
Finish |
Smooth and Uniform, Full matt |
Shelf Life |
1 Year |
Surface Preparation |
New Surface: Surface should be free from oil, grease, salt and any other foreign matter. Clean the surface mechanically or manually. Maintanance: Manual cleaning to remove any loose particle oil, grease and any other foreign matter. |
Applicable Industry |
Packaging/OEM Engineering/ General Maintainance |
Application Method |
Conventional Air Spray/ Brushing / Airless Spray |
Gel Time |
N/A |
Recommended Thinner |
Harlemel Q D Thinner |
Suggested Use |
It is general purpose anti-corrosive primer at economic cost for Industrial use with quick drying properties. |