High Build Coating
Description It is a two pack Epoxy base high build coating for metal and concrete surfaces. It is a surface tolerant self priming coating having good chemical resistance and moisture tolerance.
Volume Solids 80% ± 2
DFT 100-125 Microns
Mixing Ratio BASE HARD. 4 : 1
Pot Life 4 hrs. at 30OC and 65% relative humidity
Spreading Rate 6.5 – 8 Sq.m/ltr
Surface Dry 3 hrs. at 30OC and 65% relative humidity
Hard Dry 10 hrs. at 30OC and 65% relative humidity
Subsequent Coat As per substrate condition recommended coating system
RECOATING TIME - MIN 16 Hrs at 30OC and 65% relative humidity
Fully Cured 7 Days
Shelf Life Base: 12 months Hardner: 6 months
Surface Preparation "New Steel: Recommended for abrasive blasting to Sa2½. If steel is coated by shop primer, clean all damages to shop primer and also clean the surface free from oil grease and any other foreign particles. Maintenance: Remove oil, grease etc with a detergent wash. Remove salt and other contaminants by high pressure fresh water hosing. Remove all rust and loose materials by abrasive blasting or mechanical cleaning. Dust off residues. For best results remove all loose rust by wire brushing and chipping. "
Applicable Industry Maintanance
Application Method Brush/ Airless Spray
Recommended Thinner Harlepoxy Thinner
Sugested Use To use in varied conditions for protection of all types of metal surfaces. This can be used on manually cleaned surface where blasting is not possible.
“Delivering Quality Coatings, Building Powerful Bonds”
Harlequin Paints Pvt. Ltd. Products catalogue