

Description | It is a two pack shop coat primer based on Epoxy resin and Red Oxide pigment. It gives protection to the cut and weld exposed surface from corrosion with no problem in cutting and welding of steel. Generally it protects steel from corrosion for 6 - 7 months. |
Volume Solids | 35% ± 2 |
DFT | 25 microns |
Mixing Ratio | BASE HARD. 3 : 1 |
Pot Life | 5-6 hrs. at 30OC and 65% relative humidity |
Spreading Rate | 13 -15 sq.m. / ltr. |
Surface Dry | 10 - 15 min at 30OC and 65% relative humidity |
Hard Dry | 4-6 hrs. at 30OC and 65% relative humidity |
Subsequent Coat | As per substrate condition recommended coating system |
RECOATING TIME - MIN | 24 hrs. at 30OC and 65% relative humidity |
RECOATING TIME - MAX | None |
Fully Cured | 7 Days |
Shelf Life | Base: 12 months Hardner: 6 months |
Surface Preparation | "Recommended surface should be free from oil, grease, salt and any other foreign matter Blast clean to Sa2½ minimum with Surface profile not more than 75 Microns. " |
Applicable Industry | Maintanance / OEM |
Application Method | Conventional Air Spray/ Brush/ Airless Spray |
Recommended Thinner | Harlepoxy Thinner |
Sugested Use | Generally used as prefabrication primer for steel surfaces. It can be used as a primer for steel structures in severe corrosive conditions. |