Harlequinpaints

High Build Coating

HARLEPOXY ZN PRIMER 35 M

Description	It is a two pack pre-welding or shop coat primer based on Epoxy resin and Zinc Dust. It gives protection to the cut and weld exposed surface from corrosion with no problem in cutting and welding of steel. Generally it protects steel from corrosion for 6-7 months.
Volume Solids	35 % Â± 2
DFT	25 microns13 - 15 sq.m./ltr.
Mixing Ratio	BASE HARD. 3 : 1
Pot Life	8 Hrs at 30OC and 65% Relative Humidity
Spreading Rate	13 - 15 sq.m./ltr.
Surface Dry	7 -10 min at 30OC and 65% relative humidity
Hard Dry	6 - 8 hrs. at 30OC and 65% relative humidity
Subsequent Coat	As per substrate condition recommended coating system
RECOATING TIME - MIN	18 hrs. at 30OC and 65% relative humidity
RECOATING TIME - MAX	None
Fully Cured	7 Days
Shelf Life	Base: 12 months Hardner: 6 months
Surface Preparation	"Recommended surface should be free from oil, grease, salt and any other foreign matter Blast clean to Sa2Â½ minimum with Surface profile not more than 75 Microns. "
Applicable Industry	Maintanance /OEM
Application Method	Conventional Air Spray/ Brush/ Airless Spray
Recommended Thinner	Harlepoxy Thinner
Sugested Use	Generally used as prefabrication primer for steel surfaces. It can be used as a primer for steel structures in severe corrosive conditions.