Harlequinpaints

High Build Coating

HARLEPOXY PM 40 M

Description	It is a two pack Epoxy base polyamide cured coating having excellent resistant to chemicals, sea-water, mineral water etc.
Volume Solids	40% Â± 2
DFT	30-40 Microns
Mixing Ratio	BASE HARD. 3 : 1
Pot Life	6 Hrs at 30Â°C and 65% relative humidity
Spreading Rate	10Sq.m/ltr
Surface Dry	1-2 Hrs @ 30Â°C and 65% relative humidity
Hard Dry	8 Hrs @ 30Â°C and 65% relative humidity
Subsequent Coat	As per substrate condition recommended coating system
RECOATING TIME - MAX	7 days
RECOATING TIME - MIN	12 Hrs 30Â°C and 65% relative humidity
Fully Cured	7 Days
Shelf Life	Base: 12 months Hardner: 6 months
Surface Preparation	Suitably primed surface free from oil, grease and any other foreign particles. If surface is exposed to chemical of atmosphere clean the surface thoroughly by high pressure fresh water hosing and allow to dry.
Applicable Industry	Maintanance / OEM
Application Method	Conventional Air Spray/ Brush/ Airless Spray
Recommended Thinner	Harlepoxy Thinner
Sugested Use	Recommended for all type structural steel and any surface such as concrete, asbestos non-ferrous surface in industrial atmosphere.