info@harlequinpaints.com info@harlequinpaints.com info@harlequinpaints.com
| Description | It is a two pack Epoxy base amine cured coating having excellent resistance to chemicals, solvents, minerals etc. |
| Volume Solids | 41% ± 2 |
| DFT | 30-40 Microns |
| Mixing Ratio | BASE HARD. 3 : 1 |
| Pot Life | 5 - 6 hrs. at 30°C and 65% relative humidity |
| Spreading Rate | 10 – 14 Sq.m/ltr |
| Surface Dry | 1-2 hrs. at 30°C and 65% relative humidity |
| Hard Dry | 8-10 hrs. at 30°C and 65% relative humidity |
| Subsequent Coat | As per substrate condition recommended coating system |
| RECOATING TIME - MIN | 10 hrs. at 30°C and 65% relative humidity |
| RECOATING TIME - MAX | 7 days |
| Fully Cured | 7 Days |
| Shelf Life | Base: 12 months Hardner: 6 months |
| Surface Preparation | Suitably primed surface free from oil, grease and any other foreign particles. If surface is exposed to chemical atmosphere clean the surface thoroughly by high pressure fresh water hosing and allow to dry. |
| Applicable Industry | Maintanance |
| Application Method | Conventional Air Spray/ Brush/ Airless Spray |
| Recommended Thinner | Harlepoxy Thinner |
| Sugested Use | Recommended for all type structural steel and any surface such as concrete, asbestos non-ferrous surface in industrial atmosphere. |
| Description | It is a two pack Epoxy base amine cured coating having excellent resistance to chemicals, solvents, minerals etc. It is a two pack Epoxy base polyamide cured coating having excellent resistant to chemicals, sea-water, mineral water etc. It is a two pack Epoxy based High build amine cured coating having excellent resistant to solvent chemicals, sea-water, mineral water etc. |
| Volume Solids | 60% ± 2 |
| DFT | 100 microns |
| Mixing Ratio | BASE HARD. 4 : 1 |
| Pot Life | 5-6 Hrs at 30°C and 65% relative humidity |
| Spreading Rate | 6 sq.m./ltr. |
| Surface Dry | 3-4 Hrs @ 30°C and 65% relative humidity |
| Hard Dry | 24 Hrs @ 30°C and 65% relative humidity |
| Subsequent Coat | As per substrate condition recommended coating system |
| RECOATING TIME - MIN | 14 Hrs |
| RECOATING TIME - MAX | 7 days |
| Fully Cured | 7 Days |
| Shelf Life | Base: 12 months Hardner: 6 months |
| Surface Preparation | Suitably primed surface free from oil, grease and any other foreign particles. If surface is exposed to chemical atmosphere, clean the surface thoroughly by high pressure fresh water hosing and allow to dry. |
| Applicable Industry | Maintanance |
| Application Method | Brush/ Airless Spray |
| Recommended Thinner | Harlepoxy Thinner |
| Sugested Use | Recommended for all type structural steel and any surface such as concrete, asbestos non-ferrous surface in industrial atmosphere. |
| Description | It is a two pack Epoxy based High build polyamide cured coating having excellent resistant to chemical, sea-water, mineral water etc. |
| Volume Solids | 60% ± 2 |
| DFT | 100 Microns |
| Mixing Ratio | BASE HARD. 4 : 1 |
| Pot Life | 6 Hrs at 30°C and 65% relative humidity |
| Spreading Rate | 6 Sq.m/ltr |
| Surface Dry | 3-4 Hrs @ 30°C and 65% relative humidity |
| Hard Dry | 24 Hrs @ 30°C and 65% relative humidity |
| Subsequent Coat | As per substrate condition recommended coating system |
| RECOATING TIME - MIN | 16 Hrs at 30°C and 65% relative humidity |
| RECOATING TIME - MAX | 7 days |
| Fully Cured | 7 Days |
| Shelf Life | Base: 12 months Hardner: 6 months |
| Surface Preparation | Suitably primed surface free from oil, grease and any other foreign particles. If surface is exposed to chemical atmosphere, clean the surface thoroughly by high pressure fresh water hosing and allow to dry. |
| Applicable Industry | Maintanance / OEM |
| Application Method | Brush/ Airless Spray |
| Recommended Thinner | Harlepoxy Thinner |
| Sugested Use | Recommended for all type structural steel and any surface such as concrete, asbestos non-ferrous surface in industrial atmosphere. |
| Description | It is a two pack Epoxy base polyamide cured coating having excellent resistant to chemicals, sea-water, mineral water etc. |
| Volume Solids | 40% ± 2 |
| DFT | 30-40 Microns |
| Mixing Ratio | BASE HARD. 3 : 1 |
| Pot Life | 6 Hrs at 30°C and 65% relative humidity |
| Spreading Rate | 10Sq.m/ltr |
| Surface Dry | 1-2 Hrs @ 30°C and 65% relative humidity |
| Hard Dry | 8 Hrs @ 30°C and 65% relative humidity |
| Subsequent Coat | As per substrate condition recommended coating system |
| RECOATING TIME - MAX | 7 days |
| RECOATING TIME - MIN | 12 Hrs 30°C and 65% relative humidity |
| Fully Cured | 7 Days |
| Shelf Life | Base: 12 months Hardner: 6 months |
| Surface Preparation | Suitably primed surface free from oil, grease and any other foreign particles. If surface is exposed to chemical of atmosphere clean the surface thoroughly by high pressure fresh water hosing and allow to dry. |
| Applicable Industry | Maintanance / OEM |
| Application Method | Conventional Air Spray/ Brush/ Airless Spray |
| Recommended Thinner | Harlepoxy Thinner |
| Sugested Use | Recommended for all type structural steel and any surface such as concrete, asbestos non-ferrous surface in industrial atmosphere. |
| Description | It is a two pack Epoxy base solvent – less coating with excellent anticorrosive property and abrasion resistant including good resistant to chemicals. |
| Volume Solids | 90% ± 2 |
| DFT | 150-200 Microns |
| Mixing Ratio | BASE HARD. 2 : 1 |
| Pot Life | 3 Hrs at 30°C and 65% relative humidity |
| Spreading Rate | 4.5 - 6 Sq.m/ltr |
| Surface Dry | 4-5 hrs. at 30°C and 65% relative humidity |
| Hard Dry | 24 hrs. at 30°C and 65% relative humidity |
| Subsequent Coat | As per substrate condition recommended coating system |
| RECOATING TIME - MIN | 18 hrs. at 30°C and 65% relative humidity |
| RECOATING TIME - MAX | 48 hrs. at 30°C and 65% relative humidity |
| Fully Cured | 7 Days |
| Shelf Life | Base: 12 months Hardner: 6 months |
| Surface Preparation | Suitably primed surface free from oil, grease and any other foreign particles. If surface is exposed to chemical atmosphere, clean the surface thoroughly by high pressure fresh water hosing and allow to dry. |
| Applicable Industry | Brush/ Airless Spray |
| Application Method | Maintanance |
| Recommended Thinner | Harlepoxy Thinner |
| Sugested Use | For use on metal and concrete surfaces. |
20 & 21, Universal Industrial Estate, Sajgoan
Taluka: Khalapur District: RaigadState:Maharashtra - 410 203
Factory: (02192) 263244
