Harlequinpaints

Electronic and Electrical

Harlepoxy Clear Primer

Grade	Industrial Grade 1
Drying System	Air Drying Under Coat
Description	It is a two pack clear primer based on Epoxy resin and polyamide curing agent. It gives a good protection in chemical and corrosive atmosphere.
Volume Solids	38 /-2 %
DFT	25-30 Âµm per coat
Mixing Ratio	BASE : HARDNER 2:1 OR 3:1
Pot Life	5 Hrs Minimum
Spreading Rate	12-15 mÂ²/L
Surface Dry	0.5-1 hr. @ 30Â°C and 65% relative humidity
Hard Dry	12-14 hrs @ 30Â°C and 65% relative humidity
Tack Free	Overnight
Subsequent Coat	As per substrate condition recommended coating system
Recoating Time - MIN	10 Hrs
Recoating Time - MAX	7 Days
Finish	Smooth Uniform Glossy
Shelf Life	Base: 12 months Hardner: 12 months
Surface Preparation	New Steel: Recommended for abrasive blasting to Sa2Â½. If steel is coated by shop primer, clean all damages to shop primer and also clean the surface free from oil grease and any other foreign particles. Maintenance: Remove oil, grease etc with a detergent wash. Remove salt and other contaminants by high pressure fresh water hosing. Remove all rust and loose materials by abrasive blasting or mechanical cleaning. Dust off residues. For best results remove all loose rust by wire brushing and chipping.
Applicable Industry	Packaging/construction industry/ General Maintainance/Electronic and Electrical
Application Method	Conventional Air Spray/ Brushing / Airless Spray
Gel Time	5 Hrs Minimum
Recommended Thinner	Harlepoxy Thinner
Suggested Use	For good quality concrete primer. It protects concrete from ingress of moisture and fortifies the concrete strength.