

| Description | It is a two pack primer based on Epoxy resin and Zinc Dust. Zinc content is 80% on dry film thickness. |
| Volume Solids | 45% ± 2 |
| DFT | 25 microns |
| Mixing Ratio | BASE HARD. 3 : 1 |
| Pot Life | 8 hrs. at 30OC and 65% relative humidity |
| Spreading Rate | 17-19 Sq.m/ltr |
| Surface Dry | 7-10 min. at 30OC and 65% relative humidity |
| Hard Dry | 6-8 hrs. at 30OC and 65% relative humidity |
| Subsequent Coat | As per substrate condition recommended coating system |
| RECOATING TIME - MIN | 24 hrs. at 30OC and 65% relative humidity |
| RECOATING TIME - MAX | None |
| Fully Cured | 7 Days |
| Shelf Life | Base: 12 months Hardner: 6 months |
| Surface Preparation | "Recommended surface should be free from oil, grease, salt and any other foreign matter Blast clean to Sa2½ minimum with Surface profile not more than 75 Microns. " |
| Applicable Industry | Maintanance / OEM |
| Application Method | Conventional Air Spray/ Brush/ Airless Spray |
| Recommended Thinner | Harlepoxy Thinner |
| Sugested Use | As a primer or shop coat primer for steel surface. |

