Harlequinpaints

High Build Coating

HARLEPOXY HB AM 60 M

Description	It is a two pack Epoxy base amine cured coating having excellent resistance to chemicals, solvents, minerals etc. It is a two pack Epoxy base polyamide cured coating having excellent resistant to chemicals, sea-water, mineral water etc. It is a two pack Epoxy based High build amine cured coating having excellent resistant to solvent chemicals, sea-water, mineral water etc.
Volume Solids	60% Â± 2
DFT	100 microns
Mixing Ratio	BASE HARD. 4 : 1
Pot Life	5-6 Hrs at 30Â°C and 65% relative humidity
Spreading Rate	6 sq.m./ltr.
Surface Dry	3-4 Hrs @ 30Â°C and 65% relative humidity
Hard Dry	24 Hrs @ 30Â°C and 65% relative humidity
Subsequent Coat	As per substrate condition recommended coating system
RECOATING TIME - MIN	14 Hrs
RECOATING TIME - MAX	7 days
Fully Cured	7 Days
Shelf Life	Base: 12 months Hardner: 6 months
Surface Preparation	Suitably primed surface free from oil, grease and any other foreign particles. If surface is exposed to chemical atmosphere, clean the surface thoroughly by high pressure fresh water hosing and allow to dry.
Applicable Industry	Maintanance
Application Method	Brush/ Airless Spray
Recommended Thinner	Harlepoxy Thinner
Sugested Use	Recommended for all type structural steel and any surface such as concrete, asbestos non-ferrous surface in industrial atmosphere.